Zinc Coated Steel/Epoxy Adhesive Systems: Investigation of the Interfacial Zone by FTIR Spectroscopy

The present study takes advantage of the ability of Fourier Transform Infrared Spectroscopy (FTIR) for the analysis of ultrathin organic films on metals. FTIR in the reflection mode (IRRAS) is used in order to study the interaction of ultrathin films of dicyandiamide (hardener of most one-pack epoxy resins) with various substrates, model ones such as gold or zinc and industrial ones such as steel and zinc-coated steels.

Pure zinc surfaces and, to a lesser extent, zinc-coated steels are shown to react with dicyandiamide after heating at 180°C, as evidenced by the frequency shift of the absorption band (at about 2200 cm^-1) characteristic for nitrile groups. As real systems consist of thick layers of a fully formulated adhesive cured onto a metallic substrate, the direct investigation of such a buried interphase is no longer possible by FTIR and by most of the known spectroscopies. Some mechanically tested specimens are then analysed, after failure, by FTIR microspectrometry. The spectra obtained, corresponding to the fracture initiation zone which is about 100 μm in diameter, advocate for the presence of an ultrathin layer of modified polymer still covering the substrate.     

用直接纺丝法制芳纶短纤维

研究了直接纺丝制取芳纶短纤维的新方法。讨论了纤维长度、直径及力学性能与纺丝条件的关系。发现影响纤维长度的主要因素是空气层高度和喷丝速度,影响纤维直径的主要因素为喷口直径及喷丝速度。此外,还用PPTA短纤维制成了均匀的PPTA"浆粕"纤维。     

单螺杆挤出过程的数值模拟

以三段七区物理模型为基础，采用面向对象程序设计语言VisualC ，对整个单螺杆挤出过程进行了数值模拟。所得压力。温度等工艺参数的模拟结果与实验值吻合较好，说明采用数学模型的正确性和数值算法的可行性。     

生物质转化的共性问题研究——生物质科学与工程学的建立与发展

生物质资源的高值转化是研究热点。由于现有的生物质利用技术存在的技术单一,缺乏系统性理论指导等问题,导致原料利用率低,经济效益差,难以实现工业化生产,迫切需要建立新的理论体系。通过深入分析生物质转化过程中的共性问题,在综合多学科知识的基础上,提出了生物质科学与工程学这一理念,从生物质原料工程学,生物质转化过程工程学和生物质产品工程学三方面对生物质利用技术进行了全面、系统的研究,为生物质类可再生资源的高值化利用提供了新的研究思路。     

磺酰胺的制备

由N，N-二甲基-2-氯烟酰胺经成盐反应，酸化反应，氧氯化反应，氨化反应制得除草剂烟嘧磺隆的关键中间体2-氨基磺酰基-N，N-二甲基烟酰胺。总收率可达65．1％。     

Alternative hydrocarbon solvents for cottonseed extraction

Hexane has been used for decades to extract edible oil from cottonseed. However, due to increased regulations affecting hexane because of the 1990 Clean Air Act and potential health risks, the oil-extraction industry urgently needs alternative hydrocarbon solvents to replace hexane. Five solvents,n-heptane, isohexane, neohexane, cyclohexane, and cylopentane, were compared with commercial hexane using a benchscale extractor. The extractions were done with a solvent to cottonseed flake ratio of 5.5 to 1 (w/w) and a miscella recycle flow rate of 36 mL/min/sq cm (9 gal/min/sq ft) at a temperature of 10 to 45°C below the boiling point of the solvent. After a 10-min single-stage extraction, commercial hexane removed 100% of the oil from the flakes at 55°C; heptane extracted 100% at 75°C and 95.9% at 55°C; isohexane extracted 93.1% at 45°C; while cyclopentane, cyclohexane, and neohexane removed 93.3, 89.4, and 89.6% at 35, 55, and 35°C, respectively. Each solvent removed gossypol from cottonseed flakes at a different rate, with cyclopentane being most and neohexane least effective. Based on the bench-scale extraction results and the availability of these candidate solvents, heptane and isohexane are the alternative hydrocarbon solvents most likely to replace hexane. Presented in part at the AOCS Annual Meeting & Expo, Atlanta, Georgia, May 1994.     

超声波在聚合物成型加工中降粘作用的研究及应用

对超声波进行了简单的介绍,对其在聚合物成型加工中的降粘机理进行了一定的研究以及对它在聚合物成型加工中的应用进行了综述。在聚合物的成型加工中,超声波的合理施加可以大幅度的降低聚合物熔体的粘度,降低加工设备的要求和条件,更有利于高粘度聚合物的成型加工。     

Simulation of Fe-Al compounds developed during single superphosphate manufacture

In order to analyse iron phosphate complexes and gel-like phases encountered in the single superphosphate process, experiments were performed with a free-Al, Fe apatite crystal of Durango from Mexico phosphate rock and sulfuric acid. Reaction products were studied by X-ray diffraction and surface analysis methods namely X-ray photoelectron spectroscopy and scanning electron microscopy. Results show that in a free Al, Fe-system, part of the Ca(H₂PO₄ )₂.H₂O (MCPM) forms before precipitation of any CaSO₄(CS) and gel-like phase such H₂SO₄.yH₃PO₄.xH₂O is formed. When iron is added, the precipitation rate of (CS) and (MCPM) increases and Fe₃(H₃O)H₈(PO₄)₆.6H₂O is formed. When Fe and Al are added, a gel-like phase is quickly formed with a molar ratio that changes with time and develops into crystalline compounds. The composition of this gel may be represented as a mixture of two phases: H₂SO₄.yH₃PO₄.xH₂O and a gel containing Al-Fe-Si.     

碘和硫增感剂在卤化银颗粒表面的分布

碘和硫增感剂在卤化银颗粒表面的分布＊李金培＊＊王素娥（中国科学院感光化学研究所，北京１００１０１）关键词碘化银，硫增感，软硬酸碱原理碘在卤化银微晶中的含量和分布对感光度的影响引起乳剂配方设计者的广泛注意和重视．颗粒中的碘引起其内部结构和表面结构的改变...